The CoralVue HYDROS Control 4 Starter Pack gives you ultimate control of your aquarium through a powerful and robust aquarium controller system with unique and expandable capabilities. With the HYDROS Control 4, you can monitor important parameters such as temperature, pH, ORP, water levels, and flow rates, just to name a few. Control pumps, timers, solenoids, and much more through HYDROS’ technologically advanced design. Use the HYDROS Control 4 Start Pack as a standalone system, or build an extensive controller system with the numerous other control devices available for the HYDROS system. Beginners and seasoned reefers alike will appreciate the intuitive, cloud-based controls. build an extensive system.
HYDROS Controllers have an industrial look because they are built to withstand the marine aquarium's harsh environment. The IP65-rated HYDROS enclosure and aircraft-style connectors ensure long-term reliability in the face of splashes and corrosive salt spray.
HYDROS 4 Outlet WiFi AC Power Strip
The Starter Pack includes a HYDROS Power 4 WiFi Power Strip. This is a smart power bar designed to work with the HYDROS platform. The Power 4 has four 120V AC outlets and four USB ports that are WiFi controllable using the HYDROS app for Android and iOS/Apple mobile devices. You can turn outlets on and off wirelessly over a 2.4 GHz WiFi frequency. The Power 4 has a signal range of 98’, so you can place power strips around your home without any difficulty connecting to your modem or router.
Each of the four outlets can be controlled individually while the four USB ports are controlled as one. The outlets have individual LED indicators and the USB ports have a single LED indicator. The status LEDs to indicate whether an outlet is on or off.
The Sense Port is a new concept in aquarium parameter measurement. The HYDROS Control 4 includes four Sense Ports for expanded capabilities. A Sense Port is a generic input port that can accept data from a variety of different types of sensors.
The four Drive Ports onboard the Control 4 provide switched 12V DC power for running small lights, motors, pumps, fans, and other accessories. The exact current being supplied by each port is continuously monitored by the Control unit, so if a motor or pump quits drawing current or draws too much, you will be immediately notified.
Available Drive Port Accessories
One of the most remarkable ports on the HYDROS Control 4 is the Probe Port. The Control 4 includes two Probe ports which can be connected to an ORP or pH probe, but these are no ordinary probe inputs! The circuitry is based on an ultra-high-quality input chip specifically designed for these types of probes. Each pH input provides digital galvanic isolation from the rest of the system which prevents interference with other accessories connected to the system like motors and pumps. Digital Galvanic isolation maintains the accuracy of the measurement by converting the signal to a digital domain before transmitting the information.
The HYDROS Control 4 has two 0-10V I/O (input and output) ports that allow it to control and receive commands from other HYDROS devices as well as accessories from other brands. A legacy automation system can provide input via the 0-10V Ports. They can control variable speed pumps and can also be used to monitor simple switches, like push buttons or float switches.
The HYDROS Control 4 includes two Command Bus ports which are used to power the Control unit as well as communicate with other HYDROS devices for the ultimate failsafe.
1 x Control 4 Unit
1 x Power Supply
1 x Temperature Sensor
1 x pH Probe with calibration fluid
1 x Power 4 WiFi AC Power Strip