Makes up to 75 Gallons of RODI Water Per Day!
If you have hard to remove contaminants, your city uses chloramines, or you just are not sure what is in your water the BRS 7 Stage Pro Plus RO/DI system is the perfect solution to make ultra-pure water for your saltwater aquarium. The Triple DI Saver system uses separate cation and anion beds of resin and is backed up by a mixed bed of resin for final polishing. Using the resin in a single bed form allows for greater efficiency, letting you filter more water for less money. Each BRS 7 Stage Pro Plus system includes multiple accessories from source water connections, pressure gauge, and a triple TDS meter which lets you know the purity of the water the system is producing.
BRS 7 Stage Pro RO/DI Systems are designed to produce ultra-pure water while being very efficient with deionization resin consumption. If your water is treated which chlorine, chloramines, or from a well the BRS 7 Stage will be able to clean your water down to 0 TDS after the triple DI system. Many water supplies have impurities like phosphates, ammonia, and CO2 that can use up deionization resin quickly and by using single bed cation and anion resins that are backed up by a mixed bed resin, you will only need to replace the DI cartridge that has been exhausted.
Every BRS RODI system can be installed within minutes with the easy to use Mur-lok push-connect fittings that allow you to make leak-free connections. Bulk Reef Supply RO/DI systems only use the latest filters and components in Reverse Osmosis technology. We have designed our RO/DI units especially for reef tanks, but they can produce perfect water for other types of saltwater and freshwater aquariums too. If you have a well, or you are connected to city water we offer a variety of RO/DI systems that will fit your aquarium's needs.
PLUS RO/DI System Included Upgrades
7 Stage Pro RO/DI Features:
All Bulk Reef Supply RO/DI Systems are covered by our Limited Lifetime Warranty.
7 Stage Pro RO/DI Systems - Perfect for almost any water condition, but if you have contaminants that use excessive amounts of DI resin, the 7 Stage RODI system is the ideal choice. It uses cation and anion single bed resins that give you added control and cost savings over traditionally used mixed bed resins. Most water supplies tend to exhaust either the positively or negatively charged resin more quickly than the other, and by separating the standard mixed bed resin into single beds, you are no longer throwing away good deionization resin.
7 Stages of Filtration
Stage 1 - GE ROSave.Z 1 Micron Depth Sediment Filter
Stage 2 - BRS 1 Micron Universal Carbon Block
Stage 3 - BRS 1 Micron Universal Carbon Block
Stage 4 - Dow Filmtec Reverse Osmosis Membrane
Stage 5 - Pro Series Cation Deionization Resin
Stage 6 - Pro Series Anion Deionization Resin
Stage 7 - Pro Mixed Bed Cation Deionization Resin
Gallons Per Day:75
Sediment Filter: GE ROSave.Z 1 Micron Depth Sediment Filter
Carbon Blocks: Dual BRS 1 Micron Universal Carbon Blocks
Membrane: 75 GPD Dow Filmtec Membrane*
Deionization Resin:Pro Cation DI (Stage 1) Pro Anion DI (Stage 2) Pro Mixed Bed (Stage 3)
Waste to Product Water Ratio: 3:1
Flow Restrictor: 550 ml/min
Included Source Water Connections: Chrome Faucet Diverter Valve (with adapters),
Laundry Tub/Garden Hose Adapter, EZ Angle Stop Adapter
Auto Shut Off Valve
RO Body Dimensions: 16" x 6.25" x 15.5"
DI Canister Dimensions: 10" x 6.25" x 14"
Recommended Minimum Water Pressure: 50-80 psi
Tubing Size: 1/4" RO Tubing
*DOW Filmtec 75 GPD Membranes have a 96% - 99% typical stabilized salt rejection rate that can be reproduced through the following conditions;
For more info on DOW Filmtec BW60-1812-75 Membrane - Click Here
**DOW Filmtec 100 GPD Membranes have a 96% - 98% typical stabilized salt rejection rate that can be reproduced through the following conditions;
For more info on DOW Filmtec TW30-1812-100HP Membrane - Click Here